Water problem betta fish

Frequent water changes will help keep your betta fish happy and healthy. Trying to 1 water change program and always follow it. The mark on the calendar will help you more easily manage if you have a lot of lakes. 

Keep in mind that aquarium or decorations should never be washed with soap or other chemical detergents as it can poison your fish. Never spray cleaning chemicals outside of the aquarium, because it can fall back into the lake. 

A useful method to keep all swimming between water changes is not to free oil tank. This is one great tool to suck dirt, food scraps and other waste at the bottom of the lake. Always clean lake with hot water at the end and before the multi-functional use of the lake.

Water temperature in the process: In the process of water necessary to maintain the temperature of the water, similar to, if not entirely accurate, the temperature of the water before replacing. The difference is too large to change the water temperature will cause stress to the fish. One very important thing to remember, is that if the transfer of betta fish from the lake where else to clean the lake, the temperature in the container with the temperature in the tank to be the same. 

Before cleaning the aquarium, it is important to have clean water prepared and ready to perform. If your fish live in the vial was heated at room temperature, to reservoirs few hours or overnight to the same temperature. Always remember to water for cleaning your fish tank before!

If your betta fish live in the bottle is heated, it is still important for you to maintain the water temperature as the temperature before you put the betta fish in the lake. If the pH and other chemical detergents stable right from the tap, you can regulate the respective countries, check with a thermometer, add detergent and you should be set up to take your fish back. If you need to water enough time overnight to stabilize the pH and other factors, some hot water dechlorination in the microwave and mixed with water at room temperature to reach the appropriate temperature .

With a capacity of 1 gallon: For the size of this type of barrel it is advised to perform 100% water change once a week 1. However, the best way to create one full water change schedule is to monitor the parameters of the water. Especially ammonia. It should be noted on the health of the betta is to prevent ammonia in the tank when done. If you find any ammonia it is time to change the water one part or completely. You will want to reach the point where you can avoid ammonia when practiced by changing the water one day before finding toxin. Ammonia level should always be at 0 ppm.

With a volume of more than 2 gallon: For any tank with a capacity greater than 1 gallon, such as 2 gallon tank, you can still leave it 2 weeks before the water change completely with 1 times or between 2 times water changes. Sure, water monitoring decisions to schedule toilet tank. Leftovers and garbage will be cleaned in one clock faster.

With a capacity of less than 1 gallon: With less than one gallon capacity, such as 1/2 gallon water changes will absolutely need to do 3 days. For this application, the most important is to check level acmmonia. Partial water changes every day is a great idea. If you sound too heavy, a large lake, such as one gallon would be better for you. Your fish will thank you very much if you let it live in the lake.

Tank with filter: If you have a water filter (with filter), just replace one part of the country only. If you have this application, you should try not to be one of ammonia or nitrate. Nitrate levels at 20 ppm, as small as possible.

How to clean lake (no filter): Sanitation involves transfer of fish from lake and put it in a special container with a cover, the plants and decorations ... Ensure that good hygiene lakes and sure there are no sharp objects in the tank. Never use soap or chemicals to cleanse the animals are exposed to the betta. Sanitary hot water is the way to the lake, substrate, decorations, etc..

There are two ways to transfer fish from the lake. The first way is to use the courts, fishing out gently, and then (using your hands up on the lid courts to avoid the fish jump out), carefully placed into the special one which contains enough water. Make sure that the container must be clean cover. When you have finished cleaning lake, you can take the fish back to the lake and brought back to the location of the lake.

Another method quick, harmless and reduce stress to the fish rather than the courts. In this method need 1 cup, such as the glass used, and wait for your fish to near the top of the water. When the fish were in the proper position, put the cup in the water next to the fish. This will create one vacuum and suck both water and fish in the cup. This is a place that holds fast when your toilet tank. After you have finished cleaning, pour fish back to the lake, you have to hand over the mouth of the cup and ensure fish do not jump out. First you have to be very quick, but many times you practice this method may be easier. If necessary, you can lure the fish to the 1 circular Department (probably to fish food thought), but the last time it is not necessary anymore.

Toilet tank (tank with filtration system): Once you have a filter in the tank, your job will become much easier, so just replace the part. Best replace the water is about 20 - 25%, which reduces the amount of nitrate. You always have to keep nitrate levels below 20ppm, as small as possible. When you change the water part, this is a good thing to stabilize nitrate levels as above. To find out more information about the application filter, you can use the search engine, such as Google and Yahoo!

Posted in: Aquarium,Aquarium tips,Tips